by stinow » Wed Sep 18, 2013 1:05 pm
Stomper wrote:Hi all
I am trying to work on the layout to build my control panel for my arcade cabinet.
So far I have bought an Ultimarc Joystick it is a 4-way+8-way joystick that you can switch without opening the cabinet. I have an 8 way controller for player 2 or should I get another Ultimarc for that as well??
I know I need a trackball a tron stick and a spinner for the tron stick but if I want to beable to play everything lets say Mame, AAE, Arcade PC and of course emulator controls what would I need?
IF someone here has a good Idea or good setup on how to layout the controls, what controls I need and anything else an experianced builder would have done maybe differently please help.
Hi there pal,
Good job on starting a cabinet build!
.
My advice would be to use just one Ultimarc joystick. But only if you won't see a visible difference between the two. If you do, I would advice to use the Ultimarc also for the second controller. Next to that, are you going to have friends come over for playing (because I don't and so my p2 stick is barely being used).
Do you already have an idea about your button layout? If you are planning to play a lot of fighting games, your setup will have to be different than when playing mostly adventure / sidescrolling games for example.
If you want, I can lookup if I still have my control panel layouy image available for you.
Good luck!
Main PC: Intel i5 4670K - 8gb - GTX660 - 120gb Samsung SSD - 1x 2TB sata III
Shovel Knight Aracde: Intel i3 2100, 2gb, HD4350
Donkey Kong Arcade: E6350, 2gb, HD4350, 32gb sata III stick, 1x 320gb sata II
LAN PC: Intel NUC i3, 4gb ddr3, Intel HD3000
Retro PC: P1 166mhz, 64mb, Diamond Stealth II, Voodoo 2, ATA-66 700mb
"2001 - A Retro odyssee PC": P3 S 1.4Ghz, 768mb, LeadTek GF3 Ti500, Matrox G200+ (4x dvi), 3x Seagate 40gb ATA raid 5
NES ROMs